Quote:
|
Originally Posted by bdlefferts
I just torqued down a rebuilt cylinder head and I'm trying to install the camshaft, timing gear, and timing chain but I can't seem to slip the chain around the gear. It seems too short! I don't have the tensioner installed either. Do I have to break the chain or should I be able to slip it over the timing gear and then install the tensioner?
|
it should go back on fairly easy, try moving the crank left and right, the chain may be slightly knked, be sure that when you are moving te crank to hold tension on the chain, and not to turn it to much or with much forse so you don't damage valves