Quote:
Originally Posted by engatwork
Ya'll are right. The manual that MB DOC put up states 35 Nm.
|
Yes, that one, interestingly, says just 35NM, whereas in the past I have seen the manual which has the 3 stage torque procedure...apparently MB goes back and forth on this but MB DOC's post is from a 2006 WIS so I would use that one, until they revise it again, that is.
FWIW mine were A LOT tighter than that when I removed them...I had to practically use a breaker bar to get them free! I was afraid the splined socket would round over the splines on the delivery valves they were so darn tight.