well generally there are four wires that need to be hooked up when installing a radio in a car.

Power - Constant
Power - Key on
Ground
Antenna

The rest of thew installation are speaker connections.

if you put in an aftermarket amp, then you will also need to run a remote wire tot he amp fromt he radio.

Installation is not that hard. if you can't find an adapter plug, you can always strip the wires back a bit without cutting off the plug and Solder on the wires for the new radio.

That way if you decide to sell the car and want to take out the new head unit and put in the old becker, a little cutting of the soldered wires and some electrical tape should be fine.



------------------
'92 300CE
Metallic Black (Blue Flaked) on Creme
Clear Corners
Black Grille Insert
78k Miles

Future Upgrades:
Sportline Suspension
17" AMG Monoblocks or EVO II's
94-95 Tail Lights
Euro Headlights
Chip
AMG Exhaust

Click here to Go To My 300CE Page