View Single Post
Old 11-19-2001, 08:40 AM
mbdoc mbdoc is offline
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The ideal thing to do would be to remove this relay & install jumper wire, but on the C-Class this relay is very hard to get to.
On the central locking pump you would need to ground the signal wire to the interlock relay.
There is a purple/blue wire at pin connector 7 on the locking pump that must be grounded so the relay allows the car to start.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote