Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-18-2001, 12:38 AM
Registered User
 
Join Date: Mar 2000
Posts: 528
Bypassing W202 Starter Interlock Relay

Recommended procedure for bypassing the starter interlock relay on a '94 C280 (with no alarm system)?

Is it typically the interlock relay that causes problems or is it the position switch on the driver's door lock assembly?

Location of the interlock relay?

The system is acting up with greater frequency, preventing the motor from being started unless the driver's door lock is cycled a few times with the key. TIA
Reply With Quote
  #2  
Old 11-19-2001, 09:40 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The ideal thing to do would be to remove this relay & install jumper wire, but on the C-Class this relay is very hard to get to.
On the central locking pump you would need to ground the signal wire to the interlock relay.
There is a purple/blue wire at pin connector 7 on the locking pump that must be grounded so the relay allows the car to start.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
300D no go Dusty-NZ Diesel Discussion 23 10-28-2005 05:33 PM
New Starter Installation - W126 / OM603 300SDL ccooper Tech Help 2 09-29-2004 08:46 PM
Another bad starter? How can that be? MadMerecedes Diesel Discussion 25 04-24-2004 06:18 PM
W202 C43 starter problem LINDS HANSON Tech Help 2 03-02-2004 06:13 AM
1978 4580SEL Starter won't engage! daniel Tech Help 3 06-17-2000 01:38 PM



All times are GMT -4. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page