I'm having the pump worked on, it had one of those curiosity mishaps that I seem to have more and more of these days.
I had a delivery valve holder off for a new o-ring and decided to see what that stuff in the hole looked like. All was well until I started back in with the barrel/plunger and it has an pin-slot line up requirement. I used a mirror and thought I spotted a pin at 9 oclock, NOT.
I now get zip, nada, none fuel from #5. I have went back in and reinstalled the barrel/plunger to the correct 6 oclock position but it won't stay there. It rotates and the alignment holes are facing a blank wall.
A cat has nothing on me, if I broke the housing, my wife will kill me.
I am on my way to give the channel locks a try, I'll let you know.
Harry
86 300 SDL
|