View Single Post
Old 09-26-1999, 11:11 AM
Posts: n/a
Decided to remove the cross yoke on my 74 450SE and replace bushings. What should have been a simple job is now a head scratcher! The eccentric bolt on the passenger side has insufficient clearance to be removed, consequently the yoke is held by the bolt. There is a welded on bracket holding a suspension pivot and the ground for the starter. I tried moving the yoke in all directions but can't find room to remove the bolt. Am I missing something?

1970 280SL
1974 450SE
1998 E430 Sport
2000 E55