Support the body at the jack points..........as high as possible.

Put a jack under the diff and raise it to compress the springs slightly.

Remove the shocks, the brake lines and the swaybar links.

Remove the driveshaft

Remove the diff mount.

Slowly lower the diff to the point where the springs are fully decompressed............and remove the springs.

Raise the diff to the original height.

Support the subframe close to the two front mounts (one support on either side).

Remove the two bolts at the subframe bushings.

Lower the subframe from the three support points.

Remove both axles from the hubs when the subframe is down.

Slide the subframe (with attached diff and axles) out the back of the vehicle.