I have a 1984 300SD, the signal/wiper switch has a glitch. If I turn the wiper switch to intermittant it will work as if it were in the low speed mode. If I rotate the switch, while in the intermittant mode, towards the off position just slightly then it will work intermittantly until I hit a bump then it goes back to the low speed mode even thou it is in the intermittant position. I read the Diesel Giants instructions for removing the whole switch out of a W123 but they are different on a W126. Does anyone have instructions for removing the whole thing from a W126 or any suggestions on how to correct this problem?

__________________
Gary
OBK #37