Quote:
Originally Posted by gerryvz
You should have used the OE Lemforder brand of bushing, not the cheap junk Meyle brand.
|
Are you saying that Lemforder manufactures the OE bushing for Mercedes?
Quote:
Originally Posted by DRICHFL
Well guys I was finally able to take some time and get under the rear of the Benz. After removing the rear control arm cover I discovered that the outer bushing was pretty much gone. The rear control arm bushing mounted closer to the body "inner bushing" was ok.
I begin the process of removing the outer bushing. The bushing is pressed in and I got stuck trying to remove the bushing because my ball joint press remover is to big to fit in the tight space.
I will keep you guys posted on how I get the bushing press out. If you guys have any suggestion to make the job easier please let me know.
|
I need to replace both my outer and inner bushings on my rear lower control arm. I was able to locate the inner bushing in Peachparts' online catalog, but not the outer. Can someone please help direct me to the outer bushings.
Thanks.