1994 E420 Rear end inside tire wear - PeachParts Mercedes-Benz Forum

stevenstevensteven · #17 01-04-2014, 12:16 AM

Quote:

Originally Posted by gerryvz

You should have used the OE Lemforder brand of bushing, not the cheap junk Meyle brand.

Are you saying that Lemforder manufactures the OE bushing for Mercedes?

Quote:

Originally Posted by DRICHFL

Well guys I was finally able to take some time and get under the rear of the Benz. After removing the rear control arm cover I discovered that the outer bushing was pretty much gone. The rear control arm bushing mounted closer to the body "inner bushing" was ok.

I begin the process of removing the outer bushing. The bushing is pressed in and I got stuck trying to remove the bushing because my ball joint press remover is to big to fit in the tight space.

I will keep you guys posted on how I get the bushing press out. If you guys have any suggestion to make the job easier please let me know.

I need to replace both my outer and inner bushings on my rear lower control arm. I was able to locate the inner bushing in Peachparts' online catalog, but not the outer. Can someone please help direct me to the outer bushings.

Thanks.