11-14-2014, 07:20 PM
|
A Talent for Obfuscation
|
|
Join Date: Feb 2013
Location: In the Deep State
Posts: 17,036
|
|
Quote:
Originally Posted by panZZer
All the current and recent RWD GM cars and i suspect all trucks, the C5 to current Corvette , Camaro, pontiac gto, g8, the solstice and Sky, with the aluminum cast lower a arms, there aint much adjustment able to be done--its pretty tight. The camber is adjusted with cast aluminum cam bolts with a fixed washer head ----that fits into a notch,,, and each cam bolt is made differently to dial in / clock the lower front or rear a arm pivot in,
The uppers are fixed on all the modern cars.
My question is, are these gm cam bolts all standardized so they swap between all these vehicles?
Vstech?
|
Would a comparison of GM part numbers for the same type of part on different vehicles provide an indication?
|