My 3-4 actuator arm for my W201 5spd loosened up for a second time, and I took the bolt out to put loktite on it. My mistake, as I can't get it back in in situ, the thread and hole through the actuator arm do not quite line up. This would surely be trivial with the transmission out and accessible, and some wiggle room but the tranny is presently installed.

I expect I'll be going through the tunnel with a hole saw or a 3/8 drill to gain suitable access unless someone has a bright idea.

__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times

It's hard to

more likely to

concentrate on

have an accident

two things

when you're on

at the same time.

a cell phone.

www.kiva.org It's not like there's anything wrong with feeling good, is there?