|
Ok...... good they said how much was included....
the ICE32 appears to be just PAG 100 oil...
so that is comforting...
That does sound like a good plan...
I think the oil you put directly into the evaporator has to be put downstream of the TXvalve....
so what about that rubber line used on the end of the flush can which you used to connect to the evaporator ...as a way to install that oil ?
For the record .. the AC FSM shows converting the old Txvalve into a ' fitting' by taking its ' innards out '... to access the evaporator with it in place.. so you can make connections with lines attached to , first, the flush equipment, then to the nitrogen flushing equipment then the oil insertion equipment, etc...
|