|
Number two would not likely work with standard heater hose, as it is flared at one end. Apparently silicone hose is stretchy enough to slip over the larger fitting at the block though.
Related: i pulled the hoses from monovalve to aux pump to block last night. Found a quite a bit of corrosion on the outside of the metal pipe that runs between them under the old hoses. Havent decided if I will use POR-15 or standard spraypaint to coat the outside of the pipe after I clean off the corrosion yet. I would suggest planning to replace any of the hoses you disconnect if they are original to the car.
|