Hey thanks diesel and JY I figured it out by closely measuring all the distances I am going to use a bolt from the ace store thats rated in the 10.9 class this is a heavier rating. Its 8mm x 1.25 thread pitch and 15mm long thats about 1/2" any longer it would bottom out in the converter. I will put a flat 8mm washer on some locktite and I will be good to go. The guy at the trans. shop that goofed my converter up I heard got fired heard he was a constant goof up. Do'nt like to see anyone get fired but maybe he was in the wrong line of work. Next issue is trying to get the pitman arm off bottom of steering box so far no luck got to hunt for the right tool or method.