Can the SLS pump be run from an electric motor? 50W seems about right based on the work done to raise the back end a couple inches in 10 seconds.

Y50 High-speed Brushed DC Motor 50W 12V 1650r/min Rated Current 6A

You could run a prox switch to the SLS valve so that the motor would run when the fill port opened.

You could even use a push button in the dash if you didn't want to run a prox switch or if the duty the switch sees is too severe. If the SLS pump is cam driven or driven at cam RPM the 1300 working rpm of the motor is about right, otherwise, use belts or gears. You could mount both to an accessory plate on the engine.

Member Adriel was scrapping a 300TD IDK if the head is gone or not.

__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times

It's hard to

more likely to

concentrate on

have an accident

two things

when you're on

at the same time.

a cell phone.

www.kiva.org It's not like there's anything wrong with feeling good, is there?