Quote:
Originally Posted by DanHoug
removed button climate control and repaired 2 burnt PCB tracts on pin 10, likely toasted due to over-current. ********.
|
You probably know this already but unplugging the pump (located underneath and to the right if I remember correctly, of the monovalve) which circulates hot water at idle for the heater is recommended to prevent frying the climate control unit.
In the catalog part# A0008352564 was replaced by A0008356964 (still available). Don't know if that corrected the issue.
Thanks for inadvertently answering 2 questions that I had pending!
1. That the 12mm Mcmaster shims "fit just fine".
2. That keys can be had from MB
What size shims thickness did you buy?
.