Hello all,


I am working on my 87 300d trans adjustment.

I changed all the rubber and plastic pipe.

my modulator holds vaccuum

The problem I have is firm shifts.

my vacuum to the modulator is 14 inchs Hg.

I want to increase the source vacuum from the IP to the vacuum amp so that it sends a initial idle at 17 inches or so.

I had it at 17 inches for a brief while but now it is back to 14.

I did clean all the orifaces and will do that agian later today.

Is it possible to adjust the source at the IP without too much hassle.

also I could use a little guidance with the throttle adjustment and bowden cable.

Thanks alot


bob c