Reading back over this post, I remembered that some injection pumps are incorrectly marked from the factory (Engatwork has the correct manual and can look up which ones they are). They must be installed with the mark on the pump shaft 180 degrees out. Not a problem if you didn't remove the pump and didn't drop the chain putting a new one in.

Peter

__________________
1972 220D ?? miles
1988 300E 200,012
1987 300D Turbo killed 9/25/07, 275,000 miles
1985 Volvo 740 GLE Turobodiesel 218,000
1972 280 SE 4.5 165, 000 - It runs!