View Single Post
  #5  
Old 11-25-2004, 01:17 PM
JGHowland's Avatar
JGHowland JGHowland is offline
Registered User
 
Join Date: Nov 2004
Location: Corning NY
Posts: 2
Fixed...

Quote:
Originally Posted by Phil1347
Hello,
I just found the same thing with my 93 300e and cannot fugure out how to put the parts back in. How did you do with yours

Phil
Thanks to git0 for your advice. To complete the fix, I pulled the regulator out of the door, then had to open the motor where the line spools - the wire line came off the tracks on the motor spool. While open, I threaded the lines thru their pulleys, used a pair of pliers and a little elbow grease to place the cable ends back into the keeper. The long thin piece clips over the two cable ends, and the cap on the regulator closes OVER that piece to hold it in place. Then I placed the small platic piece in the resulting slot - it appears to act as a lock. Reinstalled regulator and window works like it's supposed to.

Good luck...
Reply With Quote