Guide rod mounts,
DIY Bearing Bracket guide rod mount replacement for Mercedes Benz 300SD.
Brake light mod,
Brake light mod for 123's
Euro headlight install, courtesy of Brandon314159,
http://brandon.importtransmissionexchange.com/benz_files/lights.htm
Couple links on biodiesel and WVO,
infopop, and journeytoforever, will find links tomorrow.
Biodiesel and WVO - SVO links thread.
Turbo drain seals,
http://engine.articles.mbz.org/diesel/seals/
turbo oil drain question
W126 OM617 1985 300SD turbo drain tube gasket & seals
Misc Reference Manual for W123 & W126
http://skinnerbox.steaky.org/Service/W123/Index/Misc.htm
Auxillary water pump,
Auxiliary Water Pump W126 1985 300SD DIY
Ignition Switch Swap,
http://garnet.acns.fsu.edu/~jjs5772/W123/
Priming fuel system,
Engine rebuild - fuel prime DIY
Adjusting rack damper,
http://engine.articles.mbz.org/diesel/rackbolt/
Disabling EGR,
http://engine.articles.mbz.org/diesel/egr/
ALDA Repair,
http://engine.articles.mbz.org/diesel/alda/
Upgrading Primer Pump
Here's my payback! Diesel Primer Pump Replacement
240D fuel tank removal,
240D fuel tank removal and cleaning
Installing evaporator box,
Order for installing evap box in a W123.
Searching for more....
Updates:
"I was just reading your Cruise Amp Repair and thought this could help others. Just to let you know you don’t want to use a soldering iron over 30watts on any circuit board any hotter and the chances are high that you will damage the components also having a wet sponge or rag when soldering helps. You quickly touch the tip of the iron to the wet sponge in between joints to clean it then add a tiny bit of solder to the tip and continue I just don’t want people to get a soldering gun and fry their amps"
Other wood finishing methods,
Have to search through emails tomorrow.
Do you think it'd be tedious to go through these different documents as links or just leave it be with just the main one?
http://articles.mbz.org/
Once there are enough links the structure of the site will have to turn into drop down menus, also it'll probably be seperated into pages with and without links by posting a picture next to the link (if possible with drop down).