Hello Everyone
Your engine has been taken apart, put back together and is back in the car; ready to be started.

#1. Fill the fuel filter with fuel and install.
#2. Fill the fuel lines, from fuel filter to injector pump with fuel, use a hand lever type oil can, picture attached.
#3. Remove the injectors.
#4. Unplug the glow plug relay.
#5. Connect a good (fully charged) battery.
#6. Do not crank longer than 20 seconds, and give the starter a 60 second rest after each crank.
#7. Stop; when all of the injector tubes are spurting fuel out.
#8. Reinstall the injectors.
#9. Plug in the glow plug relay.
#10. Clean off any spilled fuel.
#11. Glow and crank.
#12. Check for fuel leaks.
#13. Clean off any leaking or spilled fuel.

Have a great day.

__________________
ASE Master Mechanic
https://whunter.carrd.co/

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
2003 Volvo V70

https://www.boldegoist.com/