Greasecar filter bag housing, 3-port valve, and FPHE = FS

[NCfriend]

All prices are obo, plus actual shipping

#1) Model # H503GP300AL2ABNL
Greasecar filter bag housing

Greasecar brand (a top designer) filter bag housing for gravity or pressurized waste fuel filtering of biodiesel, veggie oil, fryer grease, or used oils like motor or hydraulic.

Capable of 300 PSI inlet. Pressure gauge integrated into the top
Size 3, small filter bag size = more economical bag supplies

Similar models by lesser know companies run $500-1,200 online.
Used item, asking $250

#2) one tested-working, used greasecar valve similar to the SV100 = $50

"Greasecar SV100 3 port valves Built from the ground up, with Greasecar's specifications, these are the only solenoid valves available specifically for use with heated vegetable oil, biodiesel and diesel fuel. These 3-way valves are rated for 75 PSI, have Viton seals and rings for use with biodiesel, and Stainless Steelbody construction. Default setting to the common port is for diesel operation"

#3) a brand New Flat Plate Heat Exchanger (I think 18 plates) with multiple fittings for $150

"Cold weather and tired cooling systems can often lead to lower than desired fuel temperatures and inconveniently long warm-up times. A straightforward add-on to help saturate coolant heat and accelerate fuel warm-up time.
A high quality 18 plate stainless steel heat exchanger brazed with copper. With over 2.4 square feet (345.6 in2) of surface area this unit will optimize your system's heating potential. In lab testing, we were able to achieve close to 100 oF increase in vegetable oil temperature in one pass. This FPHE is designed to handle pressures up to 435 psi, temperatures from -310oF to 450oF, and has shown to provide over 26,000 Btu/hr of heat transfer in testing."

[NCfriend]

Bump with Open to Offers clause

[NCfriend]

All SOLD