I am surprised there's not more info on this, so here goes.

I am refinishing an m104 Magnesium alloy valve cover. I had it media blasted and the end result was porous. I then had it vapor honed and it brought out the nice bare shiny magnesium silver. My intention was to then have it powder coated. But it was suggested to just put a ceramic coat on it with cerakote and call it a day. I don't mind this idea, as it looks quite nice... but I am skeptical this will hold up. If there is no coating on Magnesium, it will just fall apart.

Also on the inside portion of the valve cover, the old coating is starting to flake off. I have heard "don't ever strip magnesium, it will damage it." I have also heard not to media blast the inside because you don't want it to become porous. I have also heard, the flaking is not a big deal, just leave it, there are filters that will catch it.

Does anyone have any opinion here?

Is a ceramic coat enough to protect bare magnesium? If I powder coat it, I know there are many shops that won't touch magnesium... and you have to be careful how you bake it.

What should be done about the flaking coating on the inside of the valve cover?

Thanks in advance! See pictures below.

Eric

Attached Thumbnails

       

__________________
1995 E320 Sportline Wagon "Bernard"
black on black leather

http://i.imgur.com/BdZ7jM3.png