![]() |
|
|
|
|
#1
|
|||
|
|||
'91 300E stereo upgrade...where to start?
I got this car (w124: 1991 300E) about a year back, around the same time my uncle decided to give me some stereo equipment from a BMW his sister had totaled. I want to put it in but I don't have any idea where to start! My experience working on my Benz is 0 (unless you count a carwash), but I gotta start somewhere!
Any help would be appreciated. Equipment List: Rear Speakers: Two 5 1/4" Pioneer Premier TS-A530P Sub: MTX Audio Thunder 4500 Amp: Alpine V-Power MRP-F240 Radio/CD player: Alpine (?) Deck: Alpine If pictures are needed, I'll send those later. |
#2
|
||||
|
||||
Does your car have the 4 piece stereo? (HU, two amps, and a tuner computer behind the rear seat)
-J
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket ![]() Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
#3
|
|||
|
|||
id start w rear speakers, the plastic "cups" that hold the old MB speakers wont fit a 5 1/4 but if you cut the 'lip" off you can silicon glue the new speaker in and solder the wires EZ
![]() |
#4
|
|||
|
|||
Thanks for the pic, jha. I'll see if I can't put that in tomorrow morning.
As for the four piece, I dunno. I found out how to remove the seat cushion, but I'm not sure how to get the seat backs off. I think there's a bolt holding it on there. Also, I'm not sure what an HU is. If I end up figuring out how to undo the seat, I'll post a picture of what's under there. Thanks |
#5
|
||||
|
||||
Quote:
__________________
1987 300D, arctic white/palomino--314,000 miles 1978 240D 4-speed, Euro Delivery, light ivory/bamboo--370,000 miles 2005 Jeep Liberty CRD Limited, light khaki/slate--140,000 miles 2018 Chevy Cruze diesel, 6-speed manual, satin steel metallic/kalahari--19,000 miles 1982 Peugeot 505 diesel, 4-speed manual, blue/blue, 130,000 miles 1995 S320, black/parchment--34,000 miles (Dad's car) |
#6
|
|||
|
|||
![]() u push the red clips under front of back seat, in and pull it up and out , 3 10mm bolts hold the rear seat on, both sides and one in center under seat belts ![]() |
#7
|
|||
|
|||
^ like guy above said, the fader gives you 2 sets of speaker outs, most HU have 4 FR FL RR RL benz is weird.
fader also sounds like crap, and mine only goes forward not back, id just rewire it like i did, u need literally 3 feet of wire and minimal disassembly. PS the fronts actually easier to DE fader than rear, wires r right in radio hole just yank em out! both green/black w white euro plugs |
![]() |
Bookmarks |
|
|