|
|
|
#1
|
|||
|
|||
Voice Command Install
I recently purchased the voice command module, but I didn't receive any type of wiring. I want to install it in a 2002 S430. Unfortunately no install instructions came with it. Could this be DIY install or should I call the dealer? Somone please help! Even if somone has install tips.
Thank you |
#2
|
|||
|
|||
commander
If you had all the wiring and instructions then it might be worth DIY, but since you are in the dark, I'd suggest going to your Eclipse dealer and letting them take it from here.
Did you also get the GPS and antenna?
__________________
JD |
#3
|
||||
|
||||
It mounts to the same area that the CD Changer is mounted in, left rear corner of the trunk. It needs to be integrated into the fiber-optics loop, and then the version coding in the COMAND unit will need to be updated. You'll also need to have the version coding changed in the instrument cluster and the SCM (steering jacket control module), and also have the stalk installed for the Voice Control System (upper right part of the steering jacket).
They may need to order a fiber-optics connector, or did it come with the fiber optics line and the stalk? I'd say take it to the dealer, they'll need to change the version coding in the COMAND for you using the shop computer (SDS). Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#4
|
|||
|
|||
I appreciate the replies from both of you, as for the stalk it was already wired all I did was pull the little plastic cap and the lever went in. I am most concerned with the trunk and command programming. Most likely I will call the dealer and see what they would charge me, I will most likely call the shop that installed the factory changer for me. Any other ideas or suggestions are appreciated
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|