|
|
|
#1
|
|||
|
|||
Interior touch-up paint
Does anybody know if there are supplier(s) of spray touch-up paint for interior plastic parts?
Thanks |
#2
|
||||
|
||||
The SEM aerosol is what most of the dismantlers use in my area for match. I've used it on different interior parts with success. FWIW.
http://vinylpro.safeshopper.com/29/cat29.htm?275
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
#3
|
|||
|
|||
Same stuff, different place
I got mine from world upholstery at link below.
http://www.worlduph.com/semdye.htm They do custom colors and are very helpful if you need to call. Make sure to get the sem prep to use for pre dye/paint prep and put on alot of thin coats on your final finish. Also, keep the sem prep away from your car/paint. It is a glycol ether, like brake fluid, and will eat your car's finish up like a hungry teenager. the stuff works GREAT. JCD |
#4
|
|||
|
|||
Interior
JBA & JCD
Thank you for the sites and the info concerning the hazard of using the sem-prep around the car/paint. I want to refinish so old plastic, and some plastic speaker(s) base. TimReid |
Bookmarks |
|
|