Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-05-2004, 12:15 PM
H-townbenzoboy's Avatar
Now Y2K Compliant
 
Join Date: Jul 2003
Location: Houston, TX
Posts: 4,188
1982 300D A/C and heat won't work right!!!

Okay, it's cool in Houston now, but when we had temps in the 80's and 90's just a week ago, I could only set the A/C to MIN temp setting to have cold air, any other setting that was not MIN would blow hot air. Now, I can't get heat in the cool mornings. Cold air blows out!!! Even on MAX temp!!! What's wrong here?
-Joe
__________________
Current Vice-President of MBCA|Houston

81 MB 300SD, 82 MB 300D Turbo (sold), 04 Lincoln Town Car Ultimate

Sooner or later every car falls apart, ours does it later!
-German Narrator in a MB Promotion Film about the then brand new W123.
Reply With Quote
  #2  
Old 11-05-2004, 01:03 PM
benzzy
Guest
 
Posts: n/a
Sounds like a mono valuve issue to me...

I had to rebuild mine this year...had a similair problem.

I bought one from Phil, and it took about ten minute to install.

At anyrate when your using your multimeter to check your glow plug set up check out the mono valve too on the fire wall.
Reply With Quote
  #3  
Old 11-07-2004, 01:19 AM
sixto's Avatar
smoke gets in your eyes
 
Join Date: Jun 2000
Location: SF Bay Area
Posts: 19,970
Other consideration - check that the aspirator motor is drawing air over the cabin temp sensor (there's either a small opening in the middle of the dash or by the front dome light), and that the cabin temp sensor is working.

Sixto
95 S420
87 300SDL
Reply With Quote
  #4  
Old 11-07-2004, 10:44 AM
LarryBible
Guest
 
Posts: n/a
On the 123 there is no aspirator motor.

Pull the glove box and look to the left and forward of the glove box for a plastic pipe running horizontal. There should be a foam hose running across to the temp sensor that is under the little grill in the center top of the dash.

It is probably dissintegrated and gone. Go to Home Depot and get a stick of foam pipe insulation and cut a length to slip over these two connections. Don't use any other type of hose except foam due to the thermal properties of the foam.

Good luck,
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page