Dumb question, folks... (I'll post here even though I have sold my MB diesel and this question regards a 190E as you guys are still my favorite 'Shop forum!)

I am swapping out the struts in my W201. I see the (upper) strut mounts are available separately. Having never done a strut job that used this style mount before, is this a wear part that should be replaced, or can I reuse my old ones?

Thanks!!!

Chris

__________________
1992 300D 2.5T
1980 Euro 300D (sadly, sold)
1998 Jetta TDI, 132K "Rudy"
1974 Triumph TR6
1999 Saab 9-5 wagon (wife's)

Although the Strut Mountings don't wear as quickly as the Struts themselves, it is a good idea to replace them when you fit new struts. Worn mounts can allow movement at the top of the strut which will affect your alignment and steering. They aren't usually very expensive and are straightforward to change with the struts out.

Good Luck.

__________________
1991 M-B 560SEL Arctic White/Grey 99,000 Miles
1987 M-B 300SDL Ivory/Palomino 229,000 Miles (sold but never forgotten)
2006 Volvo XC70 Blue/Beige
1999 Porsche Boxster Arena Red/Savanna Beige
1986 Porsche 928S Goldweiss/Brown

Much obliged... thanks for the tip! I'll see about getting a pair ordered and swap them out together.

Chris

__________________
1992 300D 2.5T
1980 Euro 300D (sadly, sold)
1998 Jetta TDI, 132K "Rudy"
1974 Triumph TR6
1999 Saab 9-5 wagon (wife's)