Mine have failed.
I hope to get and install the parts tomorrow.

The rear springs and shims where replaced at the same time..

If you have ABS, watch the tension on the differential speed sensor wire, you can rip it out.
Rear sub frame front bolts must be removed and frame lowered.
Rear drive shaft flex coupling must be disconnected.
I used a ball joint press to remove and install the bushings.

Attached Thumbnails

       

__________________
ASE Master Mechanic
https://whunter.carrd.co/

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
2003 Volvo V70

https://www.boldegoist.com/