Oil level sensor leaking- replace the whole sensor? - PeachParts Mercedes-Benz Forum

New2MB · #1 11-11-2005, 08:23 AM

I found the leak! I cleaned up my whole oil pan and found that the drip was coming from the oil level sensor. At least, I believe it is the oil level sensor. It is bolted on to the driver's side of the oil pan, the portion that sticks into the pan is a cylindrical shape. The leak was not coming from the o-ring that seals the aluminum body to the pan though, it was leaking from the small sensor that goes through the aluminum body. I tried to take the sensor out of the aluminum body but it wasn't coming easy and I didn't want to break it. My question is this; is there a way to remove the sensor from the body and get a new seal/sensor or do I have to buy the entire assembly with the sensor already in the aluminum body?

This is on my 87 300SDL with 167k miles.

New2MB · #2 11-11-2005, 11:05 AM

Anyone?

New2MB · #3 11-11-2005, 02:06 PM

Ok, in that case, is anyone selling an oil level sensor for an 87 300SDL?
One that doesn't leak. Thanks!

Hit Man X · #4 11-11-2005, 03:57 PM

Mmm I could swear just the seal is available.

I just checked, it's about $1.50 for the pair... I'd order some other stuff so you're not paying $6-7 to ship ~$2 in stuff.

#5 11-11-2005, 04:55 PM

Quote:

Originally Posted by Hit Man X

Mmm I could swear just the seal is available.

I just checked, it's about $1.50 for the pair... I'd order some other stuff so you're not paying $6-7 to ship ~$2 in stuff.

i have also seen the sensor leak not only through the o-ring, but also through the elactrical connection on the center, i would recommend the entire unit as opposed to just the o-ring

Hit Man X · #6 11-11-2005, 07:47 PM

Hrm... I'm curious if this is where my oil leak could be at also. The light comes on at times for low oil... so I pull over paranoid and it's still full.

New2MB · #7 11-12-2005, 01:07 AM

Quote:

Originally Posted by Hit Man X

Mmm I could swear just the seal is available.

I just checked, it's about $1.50 for the pair... I'd order some other stuff so you're not paying $6-7 to ship ~$2 in stuff.

Thanks for looking it up but if you went to Fastlane the small and large o-rings are not for the area from which the oil was leaking. The large o-ring seals it to the pan, the small o-ring is to seal the wire harness connection to the sensor. I think I'll tear it apart just to see what's in there, maybe I can even find the leak path.

Hit Man X · #8 11-12-2005, 01:10 AM

Do keep me posted in this thread or via PM please!