|
|
|
#1
|
||||
|
||||
Loose alda...
Has anyone had this happen before? I had to take mine off so I could replace the gasket under the top plate on the injection pump. At the time I didn't realize the gasket was available so I just used silicon rtv to seal it- which did the job, it doesn't leak, but with the nut attached to that plate locked tightly against the alda unit, i can still turn the whole thing side to side and after two days, its starting to leak oil from there now.
what gives? i took it apart a few times to see if I was missing anything but I still can't figure it out. Does having the paper gasket in there make enough of a difference?
__________________
1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
Bookmarks |
|
|