|
|
|
#1
|
|||
|
|||
injector or plug
mates,
if you've gotta bad injector or plug, how do you diagnose which one? cheers, sv- |
#2
|
||||
|
||||
Bad injector will make funny noises after its warmed up all the way. Loosen the line from the IP to the injector and see if the noise goes away. A bad plug will generally cause a miss on startup. That's as far as I'm going because ALL OF THIS CAN BE FOUND BY USING THE SEARCH FUNCTION!!!
__________________
Seth 1984 300D 225K 1985 300D Donor body 1985 300D Turbo 165K. Totaled. Donor Engine. It runs!!! 1980 300SD 311K My New Baby. 1979 BMW 633csi 62K+++? Dead odo |
#3
|
||||
|
||||
Answer:
Read this entire thread for glow plugs.
Glo Plug Testing? Glow Plug Testing? Injector testing: #1. Engine running at idle. #2. Loosen only one injector line at the injector (a 1/4 turn should be enough). #3. listen for changes. #4. Tighten injector line. #5. Repeat for each injector.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
Bookmarks |
|
|