![]() |
|
|
|
#16
|
||||
|
||||
Our bosio nozzles came today!! So sometime early next week we're gonna pull the injectors, bring them to the shop, and then get them back in and see what happens. Hopefully it will run a lot better.
As for idle speeds....the tach on the '83 claims about 850-900 when its idling....I think its slightly less than that though. Mine sounds slower at idle, I bet its only 700ish.....(tach doesn't work)
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#17
|
||||
|
||||
I've got the same idle shake problem, too. I've read about the gp's putting out voltage and since its so easy to check I'll try to do that tomorrow and post back with my results.
__________________
Seth 1984 300D 225K 1985 300D Donor body 1985 300D Turbo 165K. Totaled. Donor Engine. It runs!!! 1980 300SD 311K My New Baby. 1979 BMW 633csi 62K+++? Dead odo |
#18
|
||||
|
||||
We installed our new bosio'd injectors into the '83 tonight and cranked, 16 seconds later 'poom...poooom! and it was running
![]() By the way: All 5 injectors were professionally cleaned and balanced/pop tested by a local diesel injection shop They looked SO good when we got them back! all capped and awesome. They looked like brand new injectors! Total $98 at the shop + 127 for the nozzles....not too bad
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
![]() |
Bookmarks |
|
|