Yup having Tomj balance my set fixed the temp problem. It runs back at its normal steady 83C, well it gets up to 95 when traveling around 4000 rpm on the expressway in 4th gear.
The Bosio nozzles are not all that people are making the out to be. They lack the pre-ignition hole which causes noise and a little roughness. But the machine quality is better then the Indian nozzles.
Quote:
|
One thing, those nozzles are not meant for the 617 engine. The normal nozzle with the pre-ignition hole in the pintle makes a smoother, quieter power curve, everyone thinks "Bosio's" are the hot ticket, but that's the third set I've done for people and they still had a nailing or noise issue and too much fueling.
|
05-10-2006, 04:48 PM
Threaded Mode
