|
|
|
|
|
#1
11-29-2006, 08:33 PM
|
||||
|
||||
|
Clifford Car Alarm
Hello Newbe Here, First I have to say this is a GREAT Forum with a wealth of info!
I have a 1983 300D with a Clifford Car Alarm installed I'm guessing when the car was new. Someone thru the years removed parts of it and just left a bunch of wires in place. The alarm horn was removed and the wires leading to it was just cut and left dangling. I removed what I think is all the wires and some kind of Bosch relay switch to the alarm. There was a connector with a bunch of wires in it that was unattached, that seemed it should be attached to some brain unit. But no brain unit could be found. I removed all the wires under the dash, the wires attached to the interior light switch on the door jams and the wires under the hood on the right side. This includes what I think is the shock sensor. Now car will not start! Also the interior lights do not come on. Do you know where I could get a wiring diagram for a Clifford Alarm? Any Help would be great!
__________________
CJ 1983 300D 12X,XXX 
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
