The blower motor is powered independently of the CCU.

However, the aux. water pump is a common failure and it will take out the CCU if it does not rotate. Don't ask how I know this.

If the aux. pump is not turning, it will burn the circuit board on every CCU that you put in there.

So, you must go and remove the aux. pump and test it with 12V. It's located between the two firewalls. The easiest way to get it out is to remove the section of the forward firewall to give you some room to work. If you remove the firewall section, you can have the pump out in less than 30 minutes.

Test it with 12V and ground. If it does not rotate, you've found your problem. BTW, you'll need another CCU.