Help Lug Nuts - PeachParts Mercedes-Benz Forum

62bhp · #1 01-21-2007, 06:15 PM

Hey,
I have a set of Ronal's but no Lug nuts for them. My question is, does anyone know what type of lugs I can use with these wheels? The stock wheel lugs I have right now are a bit to short and I would like to get these new wheels on soon so any help is appreciated thanks,
Mike

toomany MBZ · #2 01-21-2007, 06:42 PM

Try tirerack. Or http://ezaccessory.com

62bhp · #3 01-21-2007, 07:12 PM

Are there any other mercedes lug nuts that I could use? My friend suggested that the 15 hole rims might have longer lugs that would work.

Monomer · #4 01-21-2007, 07:27 PM

lugs for merceds steel wheels are usually longer

winmutt · #5 01-21-2007, 09:39 PM

I have some 31? mm shank bolts for sale if you want. $50 + shipping for set of 20.

62bhp · #6 01-21-2007, 10:28 PM

Well, Im going to try and get some from a pick and pull near by which has some mercedes there and was curious as to which rims to look out for so I could snag the lugs.

TWeatherford · #7 01-21-2007, 10:33 PM

Quote:

Originally Posted by 62bhp

Well, Im going to try and get some from a pick and pull near by which has some mercedes there and was curious as to which rims to look out for so I could snag the lugs.

They're gonna LOVE you.

I guess thats why its called a pick and pull, but if I wanted the wheels and someone took the lugs... we won't go there.

P.E.Haiges · #8 01-21-2007, 10:41 PM

62bhp,

I have Ronal wheels on a '79 300SD and I use the longer bolts (not nuts) that are standard MB use on the Buntcake (alloy) wheels used on the 300SDs.

The lug bolts are very expensive at dealer, maybe $8 each. Less at online parts houses, even less at a junkyard.

P E H

62bhp · #9 01-21-2007, 10:47 PM

Ok thanks alot. Hopefully pick and pull will have a 300sd and yeah I know there bolts but for some reason I say lug nut instead.

toomany MBZ · #10 01-22-2007, 07:25 PM

You may be able to measure the length you need. Take into consideration offset and ball seat or taper. Measure bolt, 12mm probably, or 14mm 1.50 thread, probably, then shank length. Changed rims on the SD. I bolted on a stock rim, took measurements, then bolted on new rim, more measurements, went from there. Had to get new bolts and spacers.