|
|
|
#1
|
|||
|
|||
Primer pump question
I changed out the fuel filter in my 1981 300D this weekend. When I tried to use the primer pump it didn't seem to work. I was under the impression that you unscrewed it slightly and then pumped it. I unscrewed it as far as it would turn and it still would not pump. Am I doing it incorrectly or is this a sign that the primer pump is bad? By the way it appears to be the old style pump, but the top is metal rather than plastic like the pictures I have seen. Maybe I will just swap it out for the new style pump.
|
#2
|
||||
|
||||
The new black type does not need to be unscrewed, just press on it.
I replaced my old style one recently too and thought the new pump was not working. The new type of pump is just much easier to pump. To double check that it is working loosen the big bolt that holds the spin-on filter in place, pump the primer and look for fuel dribbling around the filter.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#3
|
|||
|
|||
Yeah, its not the new style, but it looks a little different than the other old style I have seen (the top is metal not plastic.) The problem that I have is that it doesn't pump in and out, I loosened it as much as I could and it stil doesn't pump. I assumed that after I unscrewed it I would be able to pull out on it and pump it in and out, but it doesn't budge.
|
#4
|
||||
|
||||
Unfamiliar with what you describe, yet should unscrew. Have you opened a vent of some sort, as per bgkast? Post pics? Good luck.
__________________
83 SD 84 CD |
#5
|
||||
|
||||
I've never seen such a pump either.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#6
|
||||
|
||||
The old style ones you usually have to unscrew, pull towards you, push down to pump, pull back up, push down to pump...etc...
Replacing them can be a PAIN. It took me 3 hours, a dremel, brake cleaner, and a vice grips wrench to get it off our 300D. I finally tried spraying the base (all that was left at that point) over and over with shots of brake cleaner and blowing on it to evaporate it quickly and thus supercool the metal of the primer pump. Well, it worked, I grabbed it with the wrench after doing thatm, turned, and *pop*, it came loose quite easily. Ahh, the joys of thermodynamics.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#7
|
||||
|
||||
Good grief...I just grabbed mine with some channel locks. 5 min job tops.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#8
|
||||
|
||||
I don't have any channel locks.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#9
|
||||
|
||||
They wouldn't have helped you anyway. Vice grips would provide a stronger grip. Somebody must have used a cheater bar to put yours on!
blkntancj - you may want to replace the primer with the updated black type. From fastlane (buy parts button at top of page) -----Part # ------ Product ----- Brand---Availability--Retail---Our Price D2010-268357 Diesel Primer Pump Bosch IN STOCK $29.50 $28.91
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#10
|
||||
|
||||
Quote:
__________________
1985 CA 300D Turbo , 213K mi |
#11
|
|||
|
|||
blkntancj, did the pump work before you changed the fuel filter? I've had to tug a bit at times - when I forget to soak down the plunger with WD-40 once a year. Keeps the "leather" wet.
__________________
daBenz - 1970 220D |
#12
|
|||
|
|||
This is the first time I have tried to use the primer pump as this is the first time I have changed the filters (I've only put 1000 miles on it since I purchased it), so I don't know if it worked before. What was described above is what I was expecting, unscrew, pull out, push in, pull out push in, etc to pump it. But when I unscrew it it won't pull out, I haven't yanked on it too hard because I didn't want to bust it if I was doing it wrong. I'll try spraying it with PB Blaster and see if that helps. It would be nice to get the air purged out of the system. Thanks for the help.
|
#13
|
|||
|
|||
Dont forget to use metric channel locks..
__________________
1984 Euro 300SDC, (4spd standard) 1986 Toyota Landcruiser Diesel HJ60 5spd X2 Gone but not forgotten (some sold, some stripped) 1983 300 SD, 1985 300 SD, 1983 240D, 1986 300 SDL, 1985 300 SDL, 1983 300 D, 1984 300 D, 1985 300SD, 1987 300 SDL, 1983 300 SD, 1985 300 TD Euro, 1983 380SEC, 1990 300 D, 1987 300D, 1982 300D, 1982 300D, 1994 E420, 1987 300 TD, 1987 300 D, 1984 300 D |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|