Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-22-2007, 01:55 PM
Registered User
 
Join Date: Jan 2007
Location: North Carolina
Posts: 19
Transmission leaks: What can I fix without pulling it?

My 86 300SDL has quite a few transmission leaks. I replaced the flex lines and that was the major one but it still has leaks from the bell housing, the right side banjo connection for the cooling line, and on the left side from the big plug with an internal hex. I think this big plug gives access to the front band piston or something to do with the front band. In the explode for this transmission I see two o-rings in that assembly. Does anyone know if I can pull that piston and replace the o-rings without problems? I plan to get some new washers for the banjo fitting and also replace the o-ring on the dip stick tube. Are there any other o-rings I should and can replace without pulling the transmission? I have a new pan seal and filter already.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page