The door catch mechanism came loose and bound against the glass inside my daughter's door. She forced it and was surprised when the glass burst into a million pieces.

I've searched and searched and can't find anything on putting a new piece of glass in the door. I have several parts doors and will jump into it tonight, but any advice would be appreciated.

Thanks

dd

__________________
DAILY DRIVERS:
'84 300DT 298k (Aubrey's)
'99.5 Jetta TDI IV 251k (Julie's)
'97 Jetta TDI 127k (Amber's)
'97 Jetta TDI 186k (Matt's)
'96 Passat TDI 237k (Don's
'84 300D 211k Mint (Arne- Undergoing Greasecar Conversion)

SOLD:
'82 240D 229k (Matt's - Converted-300DT w/ 4 speed

Do you have the FSM on CD? IIRC, the procedure is listed there.

I know some one on the forum has done such also. Do a search for door glass removal/installation.

__________________
RRGrassi


70's Southern Pacific #5608 Fairmont A-4 MOW car

13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.

91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K

90 Dodge D250 5.9 Cummins/5 speed. 400K

I don't have that, but I did my best with Haynes and finally got the glass out of the practice door (donar door). But that is manual and seemed relatively easy. As for getting it back into the receiving door along with the regulator....i'm still a bit foggy.

thanks

dd

__________________
DAILY DRIVERS:
'84 300DT 298k (Aubrey's)
'99.5 Jetta TDI IV 251k (Julie's)
'97 Jetta TDI 127k (Amber's)
'97 Jetta TDI 186k (Matt's)
'96 Passat TDI 237k (Don's
'84 300D 211k Mint (Arne- Undergoing Greasecar Conversion)

SOLD:
'82 240D 229k (Matt's - Converted-300DT w/ 4 speed

Driver's glass removal on 126

It's for the w126, but I'm sure the procedure is the same.

__________________
RRGrassi


70's Southern Pacific #5608 Fairmont A-4 MOW car

13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.

91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K

90 Dodge D250 5.9 Cummins/5 speed. 400K