|
|
|
#1
|
||||
|
||||
Air cleaner mount nuts
I need one of those nuts that secures the rubber air cleaner mount to the bracket. I can pick up a pack of em' at the auto parts store for the same price one probably costs at the dealer. What's the dimensions for these things? All I know is that it's 10mm, but I don't know about the threads.
__________________
'81 MB 300SD, '82 MB 300D Turbo (sold/RIP), '04 Lincoln Town Car Ultimate Sooner or later every car falls apart, ours does it later! -German Narrator in a MB Promotion Film about the then brand new W123. |
#2
|
||||
|
||||
My thread gauge can't line up do to the rubber part. But eye ballin' it, try a 6x1.25. Best bet would be to take it to a hardware store.
__________________
83 SD 84 CD |
#3
|
||||
|
||||
it is the same size nut as the air cleaner hold down center stud is. most auto parts places have a metal plate with various studs and holes to test your threads against.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#4
|
|||
|
|||
if i need to retighten again after putting lock washers and lock nut, i will prolly drill larger diameter wholes and put a beefer bolt/nut setup
__________________
Brian 82 300d turbo 164k - passed on 83 sd - passed on 04 civic hybrid - DD 06 GTO for sale - passed on 84 VW Rabbit Diesel 4dr.- passed on 94 S350D - DD 94 S320 - soon to be DD |
#5
|
||||
|
||||
You may be able to get away with that, just keep in mind the rubber mounts I've seen, have all the same size "bolt" ends. Had to retighten 'em on the SD a couple of weeks ago. Took care of that awful noise at certain rpm.
__________________
83 SD 84 CD |
#6
|
|||
|
|||
Loctite?
|
#7
|
||||
|
||||
Follow up
You can use loctite I suppose on the inside of the AC only. The bracket that receives the other end of the rubber mounts is threaded. When those mounts fail, difficult to remove WITHOUT locktie, wouldn't want to try with.
__________________
83 SD 84 CD |
#8
|
||||
|
||||
I use nylon lock nuts, and they are working very well. No idea of the size.
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
Bookmarks |
|
|