Hi,

From searching the archives, I have seen that there are instructions on how to repair the turn signal stalk to stay in place, etc. However, mine has another problem - it will stay in pl;ace and then not snap back after the turn.

I assume my whole signal stalk assembly needs to be replaced to get this functionality back.

So, though there are instructions how to gain access to repair, how different is the work to remove and replace the stalk? Given that there is an electrical connector, I assume the disassembly is more copmplex to get it all apart and back together. Is it a DIY job? A Simple DIY job? A few hours on a saturday DIY job, or a 'replace your evaporator', I have to be crazy to attempt DIY job?

Thanks for any insight.

JMH

__________________
Current Diesels:
1981 240D (73K)
1982 300CD (169k)
1985 190D (169k)
1991 350SD (116k)
1991 350SD (206k)
1991 300D (228k)
2008 ML320 CDI (199k)
1996 Dodge Ram CTD (442k)
1996 Dodge Ram CTD (267k)

Past Diesels:
1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k)