After removing the rotor, the bearing seemed worn out. I still have to figure how to remove the bearing? Do you have any idea?

_________
79' 300D auto
79' 300D manual

This is leaking from the prechamber not the injector itself if it is leaking through the indentation in the prechamber mount. This is due to a bad seal in the PC probably due to improper torque. Where are you located?

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

Thanks for the info. I am from the Philippines. Quite far from where you are. Have you experienced this? What is a good solution to this kindof problem?


_____________
79' 300D automatic
79' 300D manual

For the rear bearing, you'll need a puller, and patience, I would imagine.

__________________
83 SD

84 CD