I have been having a cold air draft blowing on my feet. the problem is
the gromet where the steeiing column goes through the firewall has had
it. several yrs ago I fixed it with some silicone, was ok for a while. now
the other side has ripped open.

Called Phill, said the part is $15.00 and with shipping probably $25.00.
to check the dealer. called Stahl Motors in Monterey, Ca. and the part
has to come out of Germany, take 7 to 10 days. cost $17.70.

My question is, has any one ever done this job? Iam sure all the 123`s
still running around have the original gromets. what have you all been
doing with this problem, if this is a problem?

Can` even emagine if I lived back east with some of that sub zero weather, makes me cold thinking about it.

The part # is 123-462-1396

Charlie Merry Charistmas

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works