|
|
|
#1
|
|||
|
|||
Clutch Hydraulic line help
Hi guys, I need help on my Diesel -> SEC project, I need to build a custom length hydraulic line from the master to slave cylinder. I need to know the size of the fittings on the master cylinder and the size of the line.
Thanks,
__________________
1984 Euro 300SDC, (4spd standard) 1986 Toyota Landcruiser Diesel HJ60 5spd X2 Gone but not forgotten (some sold, some stripped) 1983 300 SD, 1985 300 SD, 1983 240D, 1986 300 SDL, 1985 300 SDL, 1983 300 D, 1984 300 D, 1985 300SD, 1987 300 SDL, 1983 300 SD, 1985 300 TD Euro, 1983 380SEC, 1990 300 D, 1987 300D, 1982 300D, 1982 300D, 1994 E420, 1987 300 TD, 1987 300 D, 1984 300 D |
#2
|
|||
|
|||
Bump, Does anyone know the fittings sizes for the clutch line.. Normally I would use oem, but it needs to be longer since its going into a SEC, and i have lost the original.
__________________
1984 Euro 300SDC, (4spd standard) 1986 Toyota Landcruiser Diesel HJ60 5spd X2 Gone but not forgotten (some sold, some stripped) 1983 300 SD, 1985 300 SD, 1983 240D, 1986 300 SDL, 1985 300 SDL, 1983 300 D, 1984 300 D, 1985 300SD, 1987 300 SDL, 1983 300 SD, 1985 300 TD Euro, 1983 380SEC, 1990 300 D, 1987 300D, 1982 300D, 1982 300D, 1994 E420, 1987 300 TD, 1987 300 D, 1984 300 D |
Bookmarks |
|
|