![]() |
|
|
|
#1
|
||||
|
||||
300SDL Not Firing on All 6
Hello All,
'87 300SDL 202k Last week she started to idle a little rough and got progressively worse. I thought it may be the injectors so I put in a rebuilt set and fired her up (I pop tested them and all were around 2000 PSI). NO CHANGE ![]() So, I started her up and cracked open each injector line - the engine ran differently the second I turned the nuts on injectors 1 through 4. Injectors 5 and 6 made no difference. Fuel did leak out of 5 and 6. I have only had the car a few months. It does not smoke and the engine temp has been stable in the 80-90 range. More information if this helps. The previous owner said he had the delivery valve seals changed and new nozzles installed. The power level has never been what it should be - 16 second 0-60, but the car otherwise ran well and I thought I would take care of that after I got the heat/AC stuff done. Looks like the diesel gods have decided otherwise.... What do I check now? Thanks! Richard
__________________
Richard '83 300SD 180k '87 300SDL "200k" Central Ohio |
Bookmarks |
|
|