I have a euro 300td non turbo single pulley belt to replace,the bracket was put on wrong and i had the wrong belt on there,so i dont really know the spec size for the belt i do need,its on a 85 300td non turbo euro wagon single pulley,any help is greatly apprecialoved.
Ep
thanks again

__________________
W123 1985 300TD naturally aspirated

Ok people anyone?

__________________
W123 1985 300TD naturally aspirated

If I am not mistaken, the turbo has smaller pulley.

__________________
99 Gurkha with OM616 IDI turbo

2015 Gurkha with OM616 DI turbo

2014 Rexton W with OM612 VGT

Fastlane says 10x980 on the early NA engine.

The non turbo belt is wider than the turbo belt. If you use the turbo belt it will slip on the wider sheaves of the non turbo motor.

The non turbo belt may be the same as the two forty belt.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

However, The alt belt on my '80 300TD wagon is a 13x1030.

What size is the pulley? I can measure this one if needed.

Don't miss the operative word!!!

Thank all,this link from Fastlanes catalog has all the info i needed also.
http://catalog.peachparts.com/RenderScriptTemplate.epc?_cmd=epccat_VehicleAAA&cookieID=2FZ1D5F4V2FZ1D63IG&yearid=1980%40%401980&makeid=MB%40%40MB%40%40X&modelid=300-TD-001%40%40300TD&catid=W%40%40Drive+Belts&mode=PA&subcatid=W1002@@Accessory+Drive+Belt

__________________
W123 1985 300TD naturally aspirated