|
|
|
|
|
#1
10-31-2008, 11:04 PM
|
|||
|
|||
|
exhaust leak?
have an exhaust leak where manifold meets exhaust pipe...is there supposed to be a gasket there? don't see any in manual....thanks again!!!
|
|
#2
10-31-2008, 11:07 PM
|
||||
|
||||
|
Year and model?
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine
|
|
#3
11-02-2008, 09:09 AM
|
|||
|
|||
|
1982 300d non turbo thanks
|
|
#4
11-02-2008, 02:08 PM
|
||||
|
||||
|
My FSM does not list an '82 non turbo, can't help.
__________________
83 SD 84 CD
|
|
#5
11-03-2008, 01:48 AM
|
|||
|
|||
|
it's a euro model its's either 1982 or 1983 300d non turbo
|
|
#6
11-03-2008, 04:08 PM
|
||||
|
||||
|
Typical MB is a domed end on the manifold and conical/cupped flare on the mating downpipe. EPC shows 107 492 14 09 connector and 107 492 03 45 flange for a US 81 300D. If you have flat mating flanges, cut your own gasket out of gasket stock.
Sixto 87 300D
|
|
#7
11-03-2008, 05:00 PM
|
|||
|
|||
|
great thanks... so i could ask local auto store for some exhaust gasket material?
|
|
#8
11-03-2008, 07:09 PM
|
||||
|
||||
|
Should be that easy but this assumes the exhaust flanges are flat and I've yet to see MB manifold to downpipe flanges that are flat.
http://tinyurl.com/5ka4n5 Sixto 87 300D
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
